Springfield Hellcat Front Fiber Sight

SPRINGFIELD HELLCAT

$51.95

SPRINGFIELD HELLCAT

$51.95
 

SPRINGFIELD HELLCAT

In Stock • Ships in 1-2 Days • 30-day Money Back Guarantee
$51.95

Sight Type

Front Fiber Plain
Compatible with
Hellcat

CNC Machined Solid Billet Steel

Simple yet effective design with a clean radiused-notch rear sight for precise targeting

Lifetime Warranty

If it ever breaks, we replace it — no questions asked

65,000+ Rounds Tested

CNC machined from billet steel, QPQ Nitride finish

One-Hand Slide Rack

Tactical ledge cut for emergency one-handed operation

SKU: —
Lifetime Warranty
Made in Texas
Easy Installation

Why Shooters Trust TAG Precision

Fastest Target Acquisition

Ultra-bright fiber rods are larger than any competitor, gathering maximum light for an instant, crisp sight picture in any condition.

Built to Outlast Your Pistol

CNC machined from billet steel with QPQ Nitride finish. Tested beyond 65,000 rounds. Backed by a no-questions-asked Lifetime Warranty.

Designed & Made in Texas

Every TAG sight is engineered, machined, and assembled in Dallas, TX. American quality you can count on when it matters most.

Why Upgrade From Stock Sights?

Factory sights are designed to be "good enough." FiberLok™ sights are designed to be the best.

Stock Sights

The Problem

  • ✕Dim & dull in low light conditions
  • ✕Fibers prone to breaking & damage
  • ✕Complex, expensive fiber replacement
  • ✕Slower target acquisition
  • ✕Limited or no warranty coverage
FiberLok™

The Solution

  • ✓Crisp, ultra-bright fiber dot visible in any light
  • ✓65,000+ rounds tested - zero fiber failure
  • ✓Mechanically locked-in fiber system
  • ✓Instant target acquisition
  • ✓Lifetime warranty — guaranteed for life
Mechanically Locked
Fiber is secured with precision-machined channel — no glue, no shifting.
65,000+ Rounds
Stress-tested beyond any real-world scenario.

No More Broken Fiber Optics.

Advanced FiberLok™ Technology

Traditional fiber optic sights use melted ends or adhesives to hold fibers in place. Over time, recoil, head and impact causes brittle fibers to fail. FiberLok™ eliminates this with a patented mechanical locking system and flexible, unbreakable fibers.

No Melting
Heat-resistant, flexible fiber maintains integrity through extended shooting sessions.
Fast, Simple Color Swap
Change colors in seconds to suit your lighting and environment. Red, green, orange, white and black fibers available.
Fiber Securely Locked in Place
Precision-machined sight body grips flexible fiber rod mechanically.

Join thousands of shooters who've upgraded to FiberLok™ sights.

"
★★★★★

"Best fiber optic sights out there! No more having to replace broken inserts. Plus no trimming or heating to replace the fiber inserts! Great sites!"

TJ
Terry J.
✓ Verified Buyer
"
★★★★★

"These sights are unreal how they light up. Everybody that sees them on my gun cannot believe how bright they are. They improved my target hitting and my wife wants the same sights for her gun!"

DD
David D.
✓ Verified Buyer
"
★★★★★

"After seeing the quality workmanship and outstanding sight picture on my G36, my old G17 is next. IMO, these are hands down the best fiber optic sights on the market. Fantastic attention to detail, fit and finish."

RP
Rick P.
✓ Verified Buyer

Technical Specifications

Front Sight

Blade Width
3.6mm/0.142"
Blade Height
4.95mm/0.195"
Overall Height
6.45mm/0.254"
Material
Billet Steel, CNC Machined
Finish
QPQ Nitride

Rear Sight

Notch Width
4mm/0.157"
Blade Height
4.85mm/0.191"
Overall Height
6.95mm/0.274"
Material
Billet Steel, CNC Machined
Finish
QPQ Nitride
  • 5 stars: 6 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
This product has no reviews of its own. The merchant grouped it with related products, so the reviews shown are from across that group.
D
Dgonfam
Buy them, you won't regret it

Will work on OSP if you're not running an optic
These sights are very fast to catch the target and are bright AF like they take batteries bright

D
David Luna
A Sight To See

I have yet to receive my ordered sights for my Springfield XD in 40 cal, I have however used these on other weapons. I used them on my Sig series pistols and am totally thrilled on the quality of these sights. The target acquisition and sight picture is outstanding and quick, my accuracy has improved greatly. There is nothing more frustrating than not hitting the target aimed at consistently, at 66 years young my eyesight isn't what it used to be, these have almost cured me....LOL. I have no doubt that I will inherit the same degree of satisfaction with my XD. I wish they had sights available for my H&K's, I'm hoping they will in the future In a nutshell, How do I feel about Tag Precision ...As the title states " A Sight To See"

R
Richard

Exactly what I wanted fit properly arrived quickly! If I needed it, I would buy it again

S
S.

Absolutely love these sights!! They fit perfectly (front was very tight) and the sight picture you get is fire. I love the front fiber optic design and how it looks when aiming its super big and you pick it up very fast however I do wish sight makers would make two kinds of rear sights; ones with rounded edges like these TAG sights and one with the more sloped angled edges like typical Ameriglo sights. For some reason my eyes just prefer the sloped edges of the Ameriglo sights when aiming much better than the rounded edges, but alas these are still amazing sights. Now we just need a pair specifically for the CZP09F and C!!

T
Todd Owens
Significant upgrade!

I installed a set of these on my old XD-M .45.
My eyes are getting so I’m having a hard time with my sight picture using the stock white dot sights. I’m just having a hard time finding the contrast. It takes too long. Then you start wiggling around. You just can’t shoot like that. So I started looking around at FO sights. I decided to give TAG a try, and boy am I happy I did. These sights are top notch. They look great, fit precisely, and they provide that added contrast I need. Plus, you can actually change the fiber tubes quickly, and use different colors if that works better for you. These things are brilliantly designed.
And their customer service is world class.
You WILL NOT regret this purchase!

J
Jun

After noticing my sights on my Springfield XD were losing their bright whiteness, I decided to finally shop for some fiber optic sights. This is something that I'd been planning to do for a while so I started researching.
I came across Tag Precision and was impressed with their offerings.
What impressed me the most is that you can switch out the fibers very easily and don't have to cut or melt them. You simply unscrew the nut on the sights with the supplied allen wrench, pull out the fiber and replace with a new one. So simple! The fiber is extremely secure and I have no doubt they will ever fall out. Plus, they give you extra fibers.
It is night and day difference between the stock sights and the Tag Precisions sights. Extremely bright and exact accuracy. I was actually shocked at what a big difference these sights made.
Last note, the prices are extremely reasonable for the quality of sight you get from this company.

Frequently Asked Questions

How do I install TAG Precision sights?

Installation requires a sight pusher tool, a non-marring punch — or a qualified gunsmith. The rear sight slides in from the side using a dovetail, while the front sight screws in from the top. Most shooters complete the installation in 10-15 minutes.

Read our installation guide for more information.

Do Optics Ready sights work on pistols with suppressors?

Yes. TAG Precision OR-height sights are designed to work with both red dots and/or suppressors.

What makes FiberLok™ different from other fiber optic sights?

Traditional fiber optic sights use friction and melted ends to hold fibers in place, which breaks down over time from recoil, heat, and impact. FiberLok™ uses a patented mechanical locking system that grips the fiber in a precision-machined channel — no glue, no failure points.

Our sights have been tested to 65,000+ rounds with zero fiber breakage.

Can I change the fiber color myself?

Yes! One of the key benefits of FiberLok™ is its simple, fast fiber color swapping. Simply back out the retainer screw, slide the fiber out, and slide in the new color — it takes seconds.

We offer fibers in green, red, orange, yellow, and black-out. Many shooters keep multiple colors on hand for different lighting conditions.

What does the lifetime warranty cover?

Our lifetime warranty covers any manufacturing defects or fiber breakage under normal use. If your fiber ever breaks (it won't, but if it does), we'll send you replacements free of charge.

The warranty is transferable if you sell your firearm with our sights installed. Contact our support team for warranty claims.

Will Optics Ready sights co-witness with my red dot?

Standard-height sights are designed for pistols without optic cuts. For optics-ready pistols with a red dot, you'll want an Optics Ready (OR) Height sight set, which provides a lower 1/3 co-witness with most common red dot optics.

Use our Sight Finder tool to confirm the right model for your setup.

Can I use Optics Ready sights without an optic?

Yes. Optics Ready sights function normally without a red dot installed, but they sit taller than standard Tactical sights and may be less comfortable for concealed carry.